What a multi-timeframe scanner does
A multi-timeframe scanner checks one market on several timeframes and reports only the cases where they agree: the same pattern, pointing the same way, on two or more charts at once. Instead of opening the weekly, the daily and the 4H for every symbol and comparing them by eye, you get a list of markets where that comparison has already come out as a match.
On LiquidityScan this job belongs to Core Layer. It is not an extra scanner. It sits on top of three existing ones, SuperEngulfing, CRT and Bias, and shows a market when one of them gives the same signal in the same direction on several timeframes. It does not cover order blocks or fair value gaps. Those have their own multi-timeframe tools, listed near the end.
Why traders want timeframes to agree
Every lower-timeframe candle forms inside a higher-timeframe one. Six 4H candles make one daily candle, and the week's daily candles make the weekly one. So a bullish pattern on the 4H is either part of a daily and weekly move in the same direction, or a pullback against it. The 4H chart alone cannot tell you which. That is the reason for top-down analysis: the higher timeframe gives direction, the lower one gives timing.
Take the simplest of the three patterns, Bias. A candle that closes above the previous candle's high sets a bullish bias for the next candle. A close below the previous low sets a bearish one. Now apply it three times. Last week closed above the high of the week before. Yesterday closed above the high of the day before. The last finished 4H candle closed above the high of the 4H candle before it. That is three separate closes, on three sizes of candle, all leaning up.
Compare that with a market where the 4H has just closed above its prior high while the weekly closed below the prior week's low. It is the same 4H signal, but now it points against the larger candle it is forming inside. Checking this by hand means three charts per market, and that is the work a multi-timeframe scanner takes over.
The three patterns Core Layer lines up
Core Layer builds chains from three of the eight classic scanners. A chain is always one pattern repeated across timeframes, never a mix of patterns.
| Scanner | What the closed candle did | What a chain of it means |
|---|---|---|
| Bias | Closed above the previous candle's high (bullish) or below its low (bearish). | On each timeframe, a finished candle broke the one before it in the same direction. |
| CRT (Candle Range Theory) | Poked past the low (bullish) or high (bearish) of an earlier, bigger-bodied candle, then opened and closed back inside that candle's range. | A stop run and rejection on the same side of the market on more than one timeframe. |
| SuperEngulfing | Ran past the previous candle's low or high, then closed on the other side of its open (REV, a reversal) or beyond the previous close in the trend direction (RUN, a continuation). | Sweep-and-close candles pointing the same way on several charts. |
All three are read on closed candles only. A weekly leg does not exist until the weekly candle has finished, which is why a chain can change at a 4H close while its top leg stays fixed for days. If you want each pattern on its own first, there are separate walkthroughs for the daily bias scanner, for finding CRT setups every day and for scanning for engulfing reversals.
How to find chains in Core Layer, step by step
Pages inside the app need an account, which is free to create. Core Layer itself is part of the Base plan, which shows chains up to depth 3 and can alert on them, and of Pro, which goes to depth 5. It is not included in Free or Starter.
Two terms come first. A chain is one market where one of the three scanners gives the same signal, in the same direction, on two or more timeframes. Depth is how many timeframes agree, from 2 up to 5. Each chain is anchored on the Weekly, Daily or 4H.
- Open Core Layer and read the grouping. Chains are grouped by depth, deepest first. A 2-deep chain is two timeframes in agreement. A 4-deep chain is four timeframes firing the same pattern in the same direction.
- Filter to the question you are asking. You can narrow the list by the highest timeframe, by timeframes a chain must include, and by direction. For setups that agree on 4H, daily and weekly, require those three timeframes and pick long or short.
- Check how fresh each leg is. Every timeframe in a chain has a dot. The chain's own colour means the signal came on the latest candle of that timeframe. Amber means one to three candles ago. Grey means older but still holding.
- Notice the amber clock. It means the lowest timeframe in the chain is past its fresh window. The alignment still holds, but a flip in direction or a third stale candle will demote the chain.
- Click the row. The detail view gives one chart per timeframe, from the highest down, with the candle that gave each signal marked. Below it, a history lists every time the chain gained or lost a timeframe.
- Decide whether you want to be told. On Base and above, chains can send alerts by browser push, Android push or the in-app bell. Deeper chains are rarer, so an alert suits them better than checking the page. The guide to setting alerts that don't spam you covers how to keep the scope tight.
The page refreshes about once a minute, but a chain only changes when a candle closes somewhere in it. Nothing is reported from a candle that is still forming. The one place on the platform that shows what would fire if the current candle closed now is the Waiting Room, covered in the article on seeing setups one close before they trigger.
Reading one chain from top to bottom
Say a market shows a bullish Bias chain at depth 3, anchored on the Weekly. Opened up, it reads like this:
- Weekly: the last finished week closed above the high of the week before. The dot is in the chain's colour.
- Daily: the bullish daily signal came two candles ago and is still holding. The dot is amber.
- 4H: the most recent 4H candle closed above the prior 4H high. The dot is in the chain's colour, and this is the timeframe that just joined.
This tells you direction on three sizes of candle. It does not tell you where to trade. Core Layer marks signal candles, not entry zones. A trader working this chain would still go to their own entry model and wait for a pullback. That could be into a fair value gap (the three-candle gap a fast move leaves behind) or an order block (the last opposing candle before that move). The stop is defined from that structure.
What ends the chain is just as concrete. If a 4H candle now closes below the previous 4H candle's low, the 4H bias turns bearish and that timeframe no longer agrees. In the app's own description, when a timeframe stops agreeing the chain gets weaker or closes, and the history records the moment. A chain that drops from three timeframes to two just before your planned entry is information worth acting on.
Where timeframe agreement falls short
- The legs are not independent. A strong 4H push is frequently the same move that carries the daily candle past the previous day's high. Three timeframes in agreement can be one move seen at three zoom levels, not three separate confirmations. Core Layer has a marker for chains that include two timeframes that tend to move together, such as 1D and 1H. Read those with this in mind.
- Agreement arrives late. By the time the weekly, daily and 4H have all closed in one direction, price has already travelled. A chain says nothing about whether the market is stretched or sitting just under a higher-timeframe high where stops rest.
- It gives direction, not location. There are no order blocks, fair value gaps, entries, stops or targets. Those decisions stay with you.
- Higher legs update slowly. The weekly leg is fixed until the next weekly close. A lot can happen inside that week that the top of the chain will not show.
- "Stronger" means harder to break, not more likely to pay. The app ranks deeper chains first on the logic that a weekly, daily and 4-hour chain is harder to break than a 4-hour and 1-hour one. That describes how many candles would have to turn, not a measured outcome. No outcome statistics for chains are public, and none are implied here.
- Ranges produce short-lived chains. In a sideways market, closes above and below prior candles alternate, so chains form and close quickly. A history full of the same timeframe joining and leaving is describing chop.
Other multi-timeframe tools on the platform
Core Layer answers one question: is the same pattern agreeing across timeframes? Other parts of LiquidityScan handle different versions of the idea.
- Confluence uses different scanners on different timeframes that must agree on the same market and direction, for example a daily bias with a 4H CRT the same way. Dual and triple setups are on Base, and ordered sequences are on Pro. See how the Confluence engine stacks scanners.
- Mega Order Block (MOB) is the zone-based counterpart: two or more order blocks nested inside a higher-timeframe anchor block. It is explained in order block inside an order block.
- CISD+ finds a lower-timeframe CISD inside a same-direction higher-timeframe one. A CISD is a change in state of delivery, where a candle closes back beyond the level where the last run into a swing high or low began. See multi-timeframe CISD. The Fair Value Gaps scanner also grades gaps by multi-timeframe nesting.
Frequently Asked Questions
What is a multi-timeframe scanner?
It is a tool that checks the same market on several timeframes and lists only the markets where a pattern agrees in direction on two or more of them. It replaces the manual step of flipping between the weekly, daily and 4H charts to see whether they line up.
Does Core Layer scan order blocks and fair value gaps across timeframes?
No. Core Layer works only with SuperEngulfing, CRT and Bias. For zones, LiquidityScan has separate scanners: Mega Order Block for order blocks nested inside a higher-timeframe block, and the Fair Value Gaps scanner, which grades gaps by multi-timeframe nesting.
How many timeframes have to agree before a chain appears?
Two is the minimum. Depth runs from 2 up to 5. The Base plan shows chains up to depth 3 and Pro up to depth 5.
Is Core Layer available on the free plan?
No. It is not part of Free or Starter. The three scanners it reads, SuperEngulfing, CRT and Bias, are among the eight classic scanners that are free to read, so on Free you can still compare their timeframes yourself. The ready-made chains start on Base.
Does a deeper chain mean the trade is more likely to work?
It means more timeframes currently agree, so more candles would have to turn for the alignment to break. It is not a measured probability, and it says nothing about entry, stop or how far price has already moved. Treat it as context for your own decision.
Can I get an alert when a chain forms?
Yes, from the Base plan, which includes Core Layer alerts up to depth 3. Alerts arrive by browser push, Android push or the in-app bell. There is no Telegram delivery.
Related reading
- Scanner, Pulse and Core Layer: The Three LiquidityScan Surfaces — how Core Layer sits next to the raw scanner feeds and the RSI-filtered Pulse feed.
- Fractal Market Structure: How Structure Nests Across Timeframes — the price logic behind why a lower-timeframe signal depends on the candle it forms inside.
- Best ICT Timeframes: HTF Bias to LTF Entry Guide — which timeframe pairs make sense once you have a direction and need an entry.



