LiquidityScan

· GUIDES & ANALYSIS · 12 MIN READ · UPDATED 6D AGO

Best Forex Pairs for ICT Traders: Majors, Crosses and Why Exotics Behave Differently

Best Forex Pairs for ICT Traders: Majors, Crosses and Why Exotics Behave Differently

The majors, led by EUR/USD and GBP/USD, give ICT concepts the tight spreads, deep liquidity and session rhythm they depend on. Crosses add a second dollar leg to every read, and exotics change what a sweep or a fair value gap actually means.

The short answer: majors first, a few crosses second, exotics last

The best forex pairs for ICT traders are the seven majors, and for most people that means starting with EUR/USD and GBP/USD. ICT concepts (the framework taught by Michael J. Huddleston, known as ICT) read where resting orders sit and how price is delivered to them. Both readings depend on a market that is heavily traded, cheap to cross and tied to a clear session rhythm. The majors have all three. The crosses, pairs with no US dollar in them, have them in part. Exotics mostly do not, which is why the same pattern on an exotic chart often means something different.

The sections below go through the reasoning pair by pair, so you can choose two or three markets that fit the hours you trade.

What makes a pair suit ICT concepts

Five properties matter, and each one maps to a specific ICT tool.

  • A spread that is small next to the candle. A liquidity sweep is a wick that runs just past an obvious high or low to trigger the stops resting there, then closes back inside. On an intraday chart that wick may be only a few pips deep. If the spread is of similar size, you cannot tell a sweep from quote noise, and your own stop has to sit that much further away.
  • Crowded levels. ICT logic treats equal highs, equal lows and old session extremes as pools of stop orders that price is drawn to. The idea is strongest where many participants place orders around the same visible levels.
  • A session rhythm. Kill zones are the session windows, mainly London (02:00–05:00 New York time) and New York (07:00–10:00), in which ICT traders expect the day's main moves to begin. They only help if the pair is actually busy in those hours.
  • A correlated partner. SMT divergence is two correlated pairs disagreeing at a key level, for example one taking out its prior low while the other holds above its own. You need a second, closely related market to see it.
  • Continuous pricing. Tools built on gaps between candles assume that price traded more or less without interruption. Where it does not, the gaps stop carrying information.

The seven majors, pair by pair

Every major has the US dollar on one side. That shared driver is why they move as a family, and why the differences between them are mostly about session and temperament.

PairBusiest hoursHow it tends to behaveWhat to watch
EUR/USDLondon and New YorkThe most heavily traded pair. Sweeps of session highs and lows tend to be shallow and the reaction orderly.Often slow and narrow during the Asian session.
GBP/USDLondon and New YorkSame dollar driver as EUR/USD, with wider swings and deeper wicks through levels.A stop sized for EUR/USD is often too tight here.
USD/JPYTokyo, then New YorkProne to long one-directional runs when interest-rate expectations shift.Sharp reactions to official comments about the yen.
USD/CHFLondon and New YorkOften moves roughly opposite to EUR/USD, usually with less energy.Seldom shows something EUR/USD does not. More useful as a cross-check than as a main market.
USD/CADNew YorkReacts to US and Canadian data, which arrive in the New York morning, and to oil prices.Little to read before New York opens.
AUD/USDAsian session and New YorkSensitive to risk appetite and commodity prices. Can range for long stretches.Smaller daily ranges make the spread matter more on low timeframes.
NZD/USDAsian session and New YorkA close relative of AUD/USD and its natural comparison pair.The least traded of the seven, so its spread is usually the widest of the group.

EUR/USD is the usual first pair. Its London and New York moves give a new trader many clean examples of a sweep followed by a reversal, and a failed setup costs little in spread. The step-by-step guide on trading EUR/USD with ICT concepts shows how that looks through a session.

GBP/USD is the natural second pair, because the two are correlated and that makes SMT possible. If EUR/USD dips under yesterday's low while GBP/USD refuses to take its own, the disagreement is information about the dollar side of both. The article on reading EUR/USD against GBP/USD for SMT divergence covers the rules. Sterling's deeper wicks need a different stop habit, which the guide to GBP/USD's sweeps and volatility explains.

USD/JPY is the pair for traders who are awake during Tokyo hours, or who want a major that does not simply echo the euro. Its drivers differ enough that it deserves separate study. Start with how USD/JPY behaves under ICT concepts.

Crosses: two dollar pairs in one chart

A cross is priced through the dollar even though the dollar is not in its name. EUR/JPY is in effect EUR/USD multiplied by USD/JPY. GBP/JPY is GBP/USD multiplied by USD/JPY. That one fact explains most of how crosses behave.

  • When both legs push the same way, the cross trends harder than either. EUR/USD rising while USD/JPY also rises gives a steep EUR/JPY advance with shallow pullbacks.
  • When the legs offset, the cross chops. Structure signals flip back and forth. That includes the BOS (break of structure, a close beyond the last swing in the trend's direction) and the CHoCH (change of character, the first close beyond a swing against the trend).
  • A sweep on the cross can come from either leg. Before trusting a wick through a GBP/JPY low, check whether GBP/USD or USD/JPY swept a level of its own at the same moment. A cross sweep that lines up with one on a dollar leg has a visible cause. One that appears on the cross alone is harder to explain.

Spreads on crosses are wider than on majors, though far tighter than on exotics. The practical adjustment is to trust the 5-minute and 15-minute charts a little less and the 1-hour chart and above a little more.

The crosses also differ a great deal from each other. Yen crosses have large daily ranges and attract traders who want movement. The guide to trading GBP/JPY with ICT concepts deals with the stop distance that requires. EUR/GBP is the opposite: slow, frequently range-bound and mostly active in London. Crosses between commodity currencies, such as AUD/NZD, can sit in a range for a long time.

Why exotics behave differently

An exotic pairs a major currency with a smaller or emerging-market one. USD/TRY, USD/ZAR and USD/MXN are the usual textbook examples. The patterns still print on their charts. What changes is what the patterns can tell you.

The spread draws wicks and takes stops

Most retail charts are drawn from bid prices, while a buy stop is triggered by the ask. On a major the two sit so close together that the difference rarely matters. On an exotic the spread is wide all day and widens further around the daily rollover and in quiet hours. Two things follow.

  • A short position's stop above a high can be hit without the chart ever showing a wick through that high.
  • A wick that does appear may be a quote stretching for a moment, not a run on resting orders.

A sweep is supposed to be evidence that stops were taken and the move was absorbed. On an exotic that evidence is much weaker.

Gaps imitate displacement

A fair value gap (FVG) is a three-candle pattern in which the first candle's wick and the third candle's wick do not overlap, leaving a strip of price that traded in one direction only. In ICT it matters because it marks displacement, a fast one-sided move that suggests urgency. On a thinly traded pair, candles often open away from the previous close simply because few quotes arrived in between. The chart shows the same three-candle shape, but nobody was urgent. Waiting for price to return to that gap and react means waiting for a response to an event that did not happen.

Thinner pools and a different clock

Draw-on-liquidity reasoning assumes a crowd of orders above equal highs and below equal lows. Fewer participants trade exotics, so the pool above any given high is thinner and gives price less reason to go there. The pair's busy hours also follow the smaller currency's home market and its data releases, which may not line up with the London and New York kill zones.

Policy risk and cost

Some smaller currencies are managed, pegged or exposed to sudden central bank decisions. A move of that kind does not pause at an order block, the last opposing candle before a strong move, which ICT traders treat as a zone price may return to. Cost is the other issue. Your stop must clear the level plus the spread, so the same idea needs a wider stop and a smaller position for the same risk. Holding overnight can add a noticeable financing charge.

None of this makes exotics untradeable. Traders who use them generally work from the 4-hour and daily charts, where a single candle is large enough to absorb the spread, and accept fewer and slower setups. Exotics are a poor place to learn what a clean sweep or a clean FVG looks like.

How to choose your own two or three pairs

  1. Start from your hours. If you can watch London, the euro and sterling pairs are active then. If you only have the New York morning, add USD/CAD to the list. If you trade the Asian session, look at USD/JPY, AUD/USD and NZD/USD. The guide to ICT kill zones for forex and the pairs that suit each one gives the windows in detail.
  2. Pick a main pair and its partner. EUR/USD with GBP/USD, or AUD/USD with NZD/USD. One is the pair you trade, the other is your SMT check.
  3. Compare the spread with your stop. If your usual stop on a 5-minute setup is only a few times the spread, the pair is too expensive for that timeframe. Go up a timeframe or change pair.
  4. Keep the list short and stable. Each pair has habits: how deep it usually sweeps, how it treats the previous day's high, how it behaves around its own data releases. You learn them by repetition on the same charts.

Gold is often lumped in with forex. It is a metal priced in dollars, with larger ranges and its own drivers. Treat it as a separate decision and read how gold (XAU/USD) trades under ICT concepts before adding it.

What pair selection will not fix

  • Your chart is one feed among many. Forex has no central exchange, so the high on your broker's chart can differ slightly from the high on another broker's. A one-pip sweep on your screen may not exist elsewhere. Give more weight to sweeps that are obvious, and remember that any charting tool or scanner that does not use your broker's feed can differ at the margin.
  • Correlated pairs double your exposure. Positions in the same direction on EUR/USD and GBP/USD are largely one view on the dollar taken twice. Count the risk across both.
  • A clean pair does not supply an edge. It makes the patterns easier to read. Sweeps on EUR/USD fail too, most often when the higher timeframe is trending straight through the level you expected to hold.

How to see majors, crosses and exotics side by side on LiquidityScan

LiquidityScan is a scanning platform. It is not a broker or a signal service. It reports ICT and Smart Money patterns on closed candles and leaves the decision to you. Its Forex mode covers 72 instruments in the same groups as this article: 7 majors, 21 crosses and 39 exotics, plus 5 metals (XAU/USD, XAG/USD, XAU/EUR, XAG/EUR and XPD/USD). Forex mode has been open to all users since 30 October 2026, and pages inside the app need a free account.

Open the All Scanners page in Forex mode and you see all 15 scanners on one page with live counts. Each card explains how its pattern works, and picking one takes you to its live signals, timeframes and filters. Three things there relate directly to pair choice.

  • Exotics are kept apart. Because of their wide spreads and gappy prices, the app keeps exotic pairs on a separate tab and leaves them out of alerts unless you pick them yourself.
  • Every scanner runs on forex. The Free plan reads the 8 classic scanners on 1H, 4H, 1D, 1W and 1M. For the 7 premium scanners, including Order Blocks, Fair Value Gaps, Liquidity Sweep and Market Structure, Free shows a live count but not the setups. Starter opens all 15 to browse.
  • Timeframes are mostly 1H and above. Most scanners work on 1H, 4H and 1D. Only Fair Value Gaps and CISD+ also have 5m and 15m, and those two intraday timeframes belong to the Base plan and above.

Once you have a short list, star those pairs on any scanner page and they collect in the Watchlist. The Free plan holds one list of five markets. Alerts can be set by scanner, market and timeframe. Scanner alerts start on Starter for the 8 classic scanners and on Base for the 7 premium ones.

Frequently Asked Questions

What is the best forex pair for an ICT beginner?

EUR/USD is the usual choice. It is the most heavily traded pair, its spread is small next to its intraday moves, and its London and New York sessions produce many clear examples of sweeps and reactions to study. That makes it the easiest chart to learn on. It does not make any single setup on it reliable.

How many forex pairs should an ICT trader watch?

Two or three is enough for most people: one main pair, one correlated partner for SMT divergence, and perhaps one pair from a different session or driver. A longer list spreads your attention and makes it harder to learn each pair's habits.

Do ICT concepts work on exotic pairs?

The shapes appear, but they carry less information. Wide and changing spreads produce wicks and stop-outs that are not real sweeps, and thin trading produces gaps that look like fair value gaps without any displacement behind them. Traders who use exotics usually stay on the 4-hour and daily charts and size positions for the wider stops.

Are crosses harder to read than majors?

Usually, yes, because a cross inherits two dollar pairs. When both legs agree it trends cleanly. When they offset, its structure becomes choppy. Checking the two underlying majors before acting on a cross signal removes much of the confusion.

Which forex pairs move most in the London and New York sessions?

The euro and sterling pairs are busiest in London and stay active through the New York morning. USD/CAD is mainly a New York pair. USD/JPY, AUD/USD and NZD/USD see more of their activity in the Asian session, with a second burst in New York.

Hayk Muradian

Hayk Muradian

Founder & Lead Analyst at LiquidityScan · 12+ years ICT/SMC trading · Institutional order flow specialist

Hayk Muradian is the founder of LiquidityScan, a professional trading intelligence platform built for ICT (Inner Circle Trader) and Smart Money Concepts (SMC) traders. With over a decade of hands-on experience reading institutional order flow across crypto, forex, and futures markets, Hayk specializes in identifying liquidity events, order blocks, and CISD setups on closed candles.

He built LiquidityScan after years of frustration with retail charting tools that ignored the mechanics institutions actually use. The platform now scans 400+ markets in real-time, surfacing the same patterns floor traders watch — without the noise.

Hayk writes about the methodology behind ICT and SMC, with a focus on practical, data-driven analysis rather than hype. He is a vocal critic of "smart money" content that misrepresents institutional intent and a strong advocate for methodology-respectful education.

View all 394 articles by Hayk Muradian →

Not trading advice. LiquidityScan publishes educational content for informational purposes only. Trading involves substantial risk of loss.